证书号:GZ26PTB00054
 
工厂信息:
  公司名称: 广州柴油机厂股份有限公司
  地址:安徽省合肥市高新区柏堰湾路 1888 号
  联系人:
 
证书信息:
  证书号:GZ26PTB00054
  检验/认可类型: 型式认可B模式
  有效期: 2026-08-31~2027-08-30
  产品类别: 选择性催化还原系统
 
产品信息:
  产品名称:选择性催化还原系统
  SCR系统参数: GSL95A
  型号: GSL95A
  催化剂型号: S1A-014-C130
  适用废气流量: ≤94660
  适用最大NOx浓度: ≤1500
  许用氨泄漏浓度: ≤10
  适用的试验和前期发证方案: 方案/Scheme A
  系统组成: 本SCR系统主要由SCR反应装置(含催化剂、吹灰装置、保温层)、混合管路、喷射管路(含保温层)、SCR电控系统(含各传感器)、供给单元、喷枪单元、废气加热装置等组成/The SCR system is mainly composed of SCR reaction device (including catalyst, Sootblowing device, insulation layer), mixing pipeline, injection pipeline (including insulation layer), SCR electronic control system (including various sensors), supply unit, spray gun unit, exhaust gas heating device etc
  SCR系统压降: SCR 系统最大允许压差 3000Pa(100%额定工况),其中 2500Pa 为反应装置压力损失,500Pa 为由 SCR 管系部件等造成的压力损失。/The maximum allowable pressure difference of the SCR system is 3000Pa (100% rated conditions), where 2500Pa is the pressure loss of the reaction device and 500Pa is the pressure loss caused by SCR piping components, etc.
  适用燃油品质、标准及最大燃油硫含量: ISO 8217-2024 DMA;RME180;RMG380 S≤0.1% (m/m)
  SCR系统起喷温度或起喷工况: ≥230℃且≥ 额定工况10%/≥ 230°C and ≥ 10% rated condition
  催化剂块更换周期: 累计运行10000小时或首次运行后3 年,先到为准/10000 hours of operation or 3 years after the first opening ,whichever comes first
  还原剂浓度及规格: 40%尿素溶液/Ureasolution (IS018611-1:2014)
  吹灰装置最低吹扫压力: 500
  还原剂最低喷射压力: 450
  适用空速范围: ≤7000
  适用面速度: ≤7.95
  适用线速度: ≤7039.55
  氨氮摩尔比适用范围: 0.8~1.0
查看电子证书